What Does “55k1ln” Refer To?
The code “55k1ln” usually points to the aircraft registration N55K. This N-Number is on file with the FAA REGISTRY. It belongs to a 1979 BEECH A36 plane – serial number E-1601.
The aircraft’s certificate came out on December 14, 1988, and stays good until January 31, 2029. It’s a Fixed Wing Single-Engine model, running on a CONT MOTOR IO 520 SERIES Reciprocating engine. MBI, a Florida corporation, owns it. The plane was deemed airworthy on October 17, 1979, and its Mode S Code (Hex) is A6FDF3.
But “55k1ln” isn’t just for planes. It also shows up for other items. You might see it for a Hytronic Gooseneck Sink Faucet, or a PRO Series Wire Feeder. An Anbernic RG 55G1 handheld game device uses it, too. There’s also a R1K 55 condensing heating boiler and a 55MH5K surgical monitor. The meaning really depends on where you see the code.
What Are the Features and Specifications of the 55k1ln Hytronic Faucet?
The 55k1ln Hytronic Gooseneck Sink Faucet uses a dual beam infrared sensor for touchless operation. It features an 8 1/2” gooseneck spout and quarter-turn wedge handles, marked with red and blue for hot and cold. This faucet delivers 1.0 GPM (3.8 LPM) at 60 PSI, thanks to its 1.0 GPM aerator.
This model meets NSF 61/9 Lead Free Requirements and ASTM.A112.18.1M standards. Its body, spout, and handles are all brass, chrome-plated. Water supply connections are 4” O.C., with CL1/2” NPT (outside) and 3/8” IPS (inside) threads.
You can add wrist handles (K-316-LU) or a low flow aerator (K-08) for a .5 GPM rate. Need a new part? The K-55SP 8-1/2” swing spout and the K-00B repair kit (with cartridges) are available. The faucet is ADA compliant, fitting well in both bathrooms and kitchens.
What Are the Key Features of the 55k1ln PRO Series Wire Feeder?
The 55k1ln PRO series wire feeders, like the LN-25 PRO, are simple, reliable, and easy to fix. These feeders sense voltage. They work with any CV welding power source, using its open circuit voltage (15-110V DC) for “Across-the Arc” operation. This means no control cable is needed, making them much easier to move around.
A key part is the MAXTRAC Wire Drive System – a tough, cast aluminum setup that feeds wire smoothly and lasts a long time. A tachometer gives exact wire feed speed. A Dual Range Wire Feed Speed feature makes it even more accurate at slower settings. For long welds, a Trigger Interlock Switch keeps operators comfortable. The unit has a flame-resistant case you can swap out in under five minutes. Its PC boards are potted, protecting them from moisture and rust. It also includes an Internal Contactor, a Gas Solenoid, an Arc Sensing Lead and Clip, and Gun Bushings. These parts make the PRO series good for many jobs: MIG, MIG-STT, and Flux-Cored welding in construction, shipbuilding, rental fleets, pipe work, and metal fabrication.
What Are the Specifications and Compatible Accessories for the 55k1ln Wire Feeder?
The 55k1ln PRO series wire feeders come in several models: the K2613-5 PRO Standard, K2613-7 PRO Extra Torque, K2614-6 PRO Dual Power, K2614-5 PIPE, and K2614-9 Ironworker. Each has its own specs and accessories. Some even work with STT, like the K1525-1 Invertec STT II power source.
These feeders all have dual digital displays for wire feed speed, amperage, and voltage. They include a CC/CV switch and an analog voltage meter. You can use them with steel, stainless steel, cored, and aluminum wires – just make sure you have the right drive rolls and guide kits, such as KP1697-5/64 or KP1697-1/16C.
Important details cover input power, output capacity, current/duty cycle, and wire feed speed. They also list wire size range, dimensions, and net weight.
Many accessories are available:
- Weld Power Cables: Choose between Twist Mate or Lug connectors,
- Control Extension Cables: These give you more reach,
- Feed Plate Gun Adapters: They fit various weld guns, including Miller, OXO, and Fast-Mate / Euro Connector models,
- Weld Guns: Options include Magnum PRO Curve Semiautomatic Guns (K2951-2-10-45) and K126 PRO Innershield Guns (K126-12). You can also get Magnum PRO expendable parts and Copper Plus contact tips,
- Optional Kits: Look for the Preflow, Postflow and Burnback Time Kit, Weld Cable Packages (K2330-2, K1803-1, K1803-2), and a Deluxe Adjustable Gas Regulator (K910-1, K910-2),
- Other Accessories: A Wire Feed Speed Meter (K586-1), a Jumper Plug Kit (K283) for CV-only power sources, Innershield Coil Adapters (K484, K435), and a Replacement Case Kit (K468) are also offered.
